(no subject)

[nataraj]

Один из винтов попытался сказать ква, и месяц назад был вовремя заменен.
Вопрос к знатокам: его сразу в топку, или чему-то странному он еще может послужить?

# smartctl /dev/sdb -a

smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.11
Device Model:     ST31500341AS
Serial Number:    9VS1LTP1
LU WWN Device Id: 5 000c50 0149c48f2
Firmware Version: CC1H
User Capacity:    1 500 301 910 016 bytes [1,50 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue Dec 10 16:51:51 2013 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  617) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   099   006    Pre-fail  Always       -       84237112
  3 Spin_Up_Time            0x0003   100   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1353
  5 Reallocated_Sector_Ct   0x0033   064   064   036    Pre-fail  Always       -       1514
  7 Seek_Error_Rate         0x000f   089   060   030    Pre-fail  Always       -       901721511
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       21026
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1082
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   094   094   000    Old_age   Always       -       6
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       98785820733
189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -       171
190 Airflow_Temperature_Cel 0x0022   074   046   045    Old_age   Always       -       26 (Min/Max 24/26)
194 Temperature_Celsius     0x0022   026   054   000    Old_age   Always       -       26 (0 11 0 0)
195 Hardware_ECC_Recovered  0x001a   043   025   000    Old_age   Always       -       84237112
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       3
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       20671677616631
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       943667022
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1806136033

SMART Error Log Version: 1
ATA Error Count: 10 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 10 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   4d+20:27:57.420  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+20:27:57.379  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02   4d+20:27:57.350  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02   4d+20:27:57.325  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+20:27:57.274  READ NATIVE MAX ADDRESS EXT

Error 9 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   4d+20:27:54.444  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+20:27:54.354  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02   4d+20:27:54.330  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02   4d+20:27:54.309  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+20:27:54.174  READ NATIVE MAX ADDRESS EXT

Error 8 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   4d+20:27:51.441  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+20:27:51.359  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02   4d+20:27:51.338  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02   4d+20:27:51.312  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+20:27:51.258  READ NATIVE MAX ADDRESS EXT

Error 7 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   4d+20:27:48.381  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+20:27:48.287  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02   4d+20:27:48.278  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02   4d+20:27:48.255  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+20:27:48.207  READ NATIVE MAX ADDRESS EXT

Error 6 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   4d+20:27:45.297  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+20:27:45.187  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02   4d+20:27:45.178  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02   4d+20:27:45.156  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+20:27:45.106  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Comments

[glserg.livejournal.com]

Магнит внутри хороший

[shaplov.livejournal.com]

Раз на раз не приходится. В одном из разобранных винтов магнит к кронштейну оказался прикреплен двумя каплями герметика (или другого клея) и сразу отвалился...

А так я эти магниты креплю к палке и достаю консервные банки из огня. Главное после каждого доставания охлаждать в воде, чтобы не размагнителся...

[rainbow-i.livejournal.com]

а ещё походное зеркальце, даже несколько =)

[shaplov.livejournal.com]

Тебе отсыпать? :-)

[rainbow-i.livejournal.com]

Не, у самой где-то валяется блин-зеркальце, но не используется - я предпочитаю на выездах свою рожу и причесон не наблюдать )))

[silverswordsman.livejournal.com]

Пепельница с саморазгрузкой ничешная, а серьезно - на коком нить компе помойкой может еще несколько лет протянуть, а если их несколько то зеркалов в ненагруженной помойке :)